Authorization Exec - TP-Link TL-SL5428 User Manual

4
Command Line Interface
- tacacs+ - Specifies all TACACS+ hosts configure with the tacacs-server
host command described on page 4-97.
- server-group - Specifies the name of a server group configured with the
aaa group server command described on 4-101. (Range: 1-255
characters)
Default Setting
Authorization is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
• This command performs authorization to determine if a user is allowed to run
an Exec shell.
• AAA authentication must be enabled before authorization is enabled.
• If this command is issued without a specified named method, the default
method list is applied to all interfaces or lines (where this authorization type
applies), except those that have a named method explicitly defined.
Example
Console(config)#aaa authorization exec default group tacacs+
Console(config)#

authorization exec

This command applies an authorization method to local console or Telnet
connections. Use the no form to disable authorization on the line.
Syntax
authorization exec {default | list-name}
no authorization exec
• default - Specifies the default method list created with the aaa
authorization exec command (page 4-107).
• list-name - Specifies a method list created with the aaa authorization exec
command.
Default Setting
None
Command Mode
Line Configuration
4-108