Aaa Accounting Update - TP-Link TL-SL5428 User Manual

- tacacs+ - Specifies all TACACS+ hosts configure with the tacacs-server
host command described on page 4-97.
- server-group - Specifies the name of a server group configured with the
aaa group server command described on 4-101. (Range: 1-255
characters)
Default Setting
Accounting is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
• The accounting of Exec mode commands is only supported by TACACS+
servers.
• Note that the default and method-name fields are only used to describe the
accounting method(s) configured on the specified TACACS+ server, and do
not actually send any information to the server about the methods to use.
Example
Console(config)#aaa accounting commands 15 default start-stop group
tacacs+
Console(config)#

aaa accounting update

This command enables the sending of periodic updates to the accounting server.
Use the no form to disable accounting updates.
Syntax
aaa accounting update [periodic interval]
no aaa accounting update
interval - Sends an interim accounting record to the server at this interval.
(Range: 1-2147483647 minutes)
Default Setting
1 minute
Command Mode
Global Configuration
Command Usage
• When accounting updates are enabled, the switch issues periodic interim
accounting records for all users on the system.
• Using the command without specifying an interim interval enables updates,
but does not change the current interval setting.
Authentication Commands
4
4-105