Configuring Relay Hosts; Adding A Relay Host - Dell DR4000 Administrator's Manual

FILE LOCATION: C:\Users\bruce_wylie\Desktop\Dell
Docs\~Sidewinder_Docs_DR4000\FRAME_Conversion_DR4000_AdminGuide\~DR4000_AG_F
3 Modify the administrator contact information as needed in any of the five
information fields.
4 Click Submit (or click Cancel to display the Email Alerts page).
The Email Alerts page is displayed, and an Updated administrator contact
information dialog is displayed when successful.

Configuring Relay Hosts

You may need to configure a mail relay host for your DR4000 system if your
network email system requires that it have an external mail server. To do this,
you define the mail relay host or edit an existing mail relay host using the Add
Relay Host or Edit Relay Host options on the options bar of the Email Alerts
page.
The mail relay host is typically an external mail server that relays email alerts
from the system to the designated recipient email addresses.

Adding a Relay Host

To configure a new mail relay host for your DR4000 system:
1 Select System Configuration Email Alerts.
The Email Alerts page is displayed.
2 Click Add Relay Host on the options bar.
The Add Relay Host dialog is displayed.
3 In Relay Host, type the name of an external mail server to act as the mail
relay host for your system.
4 Click Submit (or click Cancel to display the Email Alerts page).
The Email Alerts page is displayed, and an Updated external email server
information dialog is displayed when successful.
5 Send a test message to verify that the mail relay host is working properly.
For more information, see "Sending a Test Message" on page 43.
6 Verify that all of the intended recipient email addresses received the test
email.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 / 1 0 / 1 2 - F O R P R O O F O N LY
Configuring the DR4000 System Settings
45