Creating A Replication Schedule - Dell DR4000 Administrator's Manual

FILE LOCATION: C:\Users\bruce_wylie\Desktop\Dell
Docs\~Sidewinder_Docs_DR4000\FRAME_Conversion_DR4000_AdminGuide\~DR4000_AG_F
• The Status pane lists the peer state, the replication state, the average
transfer rate, the peak transfer rate, and the estimated time until a
sync occurs.
• The Savings pane lists the replication savings by a percentage for the
selected container.
For more information, see "Displaying the Statistics: Replication Page" on
page 73.

Creating a Replication Schedule

To schedule replication between your source and target replication
containers:
NOTE:
The Replication Schedule page displays the current DR4000 system
time zone, and current date and time.
1 Select ScheduleReplication.
The Replication Schedule page is displayed.
2 Click Schedule.
The Set Replication Schedule page is displayed.
3 Select time values to create Start Time and Stop Time setpoints (using the
hour and minutes pull-down lists) for each daily or weekly replication
schedule that you want to schedule for your system.
NOTE:
You must set a corresponding Stop Time for every Start Time in each
replication schedule you set. The DR4000 system will not support any
replication schedule that does not contain a Start Time/Stop Time pair of
setpoints (daily or weekly).
Daily Example:
To set a daily replication schedule that starts at 16:00 and stops at 23:00
(11:00 pm) on Mondays:
• Select 16 in the hours pull-down list and 00 in the minutes pull-down
list to set a Start Time of 16:00 for Monday.
• Select 23 in the hours pull-down list and 00 in the minutes pull-down
list to set a Stop Time of 23:00 for Monday.
Set the Start Time and Stop Time setpoints for any remaining days of
•
the week on which you want to schedule replication.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 / 1 0 / 1 2 - F O R P R O O F O N LY
Managing DR4000 Storage Operations
61