Configuring Compression Level Settings; Configuring Active Directory Settings - Dell DR4000 Administrator's Manual

FILE LOCATION: C:\Users\bruce_wylie\Desktop\Dell
Docs\~Sidewinder_Docs_DR4000\FRAME_Conversion_DR4000_AdminGuide\~DR4000_AG_F

Configuring Compression Level Settings

You can configure the data compression that you want used on all incoming
data that is to be backed up and deduplicated by your DR4000 system.
NOTE:
This is the global compression level setting for your system.
To configure the compression level setting on the Compression Level page,
select from the following choices:
• Fast—this is the default, and when selected, system backups are
performed faster than if Best was selected. Using this setting results in a
corresponding reduction in storage space savings.
• Best—when this level is selected, you gain the highest overall storage
space savings. Using this setting results in a longer execution time
during processing.
To configure the Compression Level setting for your system:
1 Select Storage Compression.
The Compression Level page is displayed.
2 To configure a Compression Level setting, click Edit on the options bar.
The Compression Level Settings dialog is displayed.
3 In the Compression Level list, choose the Compression Level you want to
use for the system from its choices (Fast or Best).
4 Click Set Compression Level to configure the system using this setting (or
click Cancel to display the Compression Level page).
The Updated Compression dialog is displayed when the selection is
successful.

Configuring Active Directory Settings

You need to configure this setting if you want your DR4000 system to join a
domain that contains a Microsoft Active Directory Service (ADS).
To configure the system for a domain with ADS:
1 Select System Configuration Active Directory.
The Active Directory page is displayed.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 / 1 0 / 1 2 - F O R P R O O F O N LY
40
Configuring the DR4000 System Settings