Configuring The Hardware - Dell EMC ScaleIO Ready Node 14G Manual

CHAPTER 2

Configuring the Hardware

This section describes how to configure the hardware, set BMC (iDRAC) IP
addresses, and map the ISO for servers in a ScaleIO Ready Node environment.
Set up the BMC (iDRAC) IP address and
l
Verify the status of the system hardware, storage controller, and
l
Open the KVM console....................................................................................... 21
l
Updating the BIOS, firmware and
l
BIOS...................................................18
settings......................................................... 22
Configuring the Hardware
disks............ 20
17