Dell DR4000 Administrator's Manual page 65

FILE LOCATION: C:\Users\bruce_wylie\Desktop\Dell
Docs\~Sidewinder_Docs_DR4000\FRAME_Conversion_DR4000_AdminGuide\~DR4000_AG_F
• Role (target or source)
• Remote Container Name
• Peer State (online or offline)
• Bandwidth (replication bandwidth limit)
NOTE:
Bandwidth is the replication bandwidth limit that you can set as
kilobytes per second (KBps), megabytes per second (MBps), gigabytes per
second (GBps), or as an unlimited bandwidth (default).
2 Click Create in the options bar.
The Create Replication dialog is displayed.
3 In Step 1: Select a local container, click to select a local container from the
available containers list.
4 In Step 2: Select a role, select Source or Target.
5 In Step 3: Remote container settings, select one of these two options:
• Create container on remote system
• Map to container on remote system
6 In Username, type the valid user name for the peer system (for example,
administrator).
7 In Password, type the valid password for the peer system (for example,
St0r@ge!).
8 In Peer System, type the IP address that represents the peer system (for
example, 10.10.10.10).
9 In Peer Container Name, type a name for the new container (for example,
StorageReplica1), or chose from an existing container on the peer system.
10 Click Create Replication (or click Cancel to display the Replication
page).
The Successfully added replication dialog is displayed when successful.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 / 1 0 / 1 2 - F O R P R O O F O N LY
Managing DR4000 Storage Operations
57