Turning The Scanner On And Off; Turning On - Minolta PS7000 Operator's Manual

5-3

Turning the Scanner ON and OFF

Turning on

Check that the Scanner is connected
1
to the personal computer with the
interface cable and turn the
Scanner's power switch on ("|"
position).
NOTE
Turn the scanner on before turning on the personal computer.
[Welcome to PS7000. Initializing]
2
appears on the display and the start
key turns red. The Scanner can be
operated when the start key turns
green.
NOTE
When the SCSI cable is not connected properly, Images cannot be loaded if the PC
interface cable is not connected properly.
When the message [Start Appli./Driver] appears on the display, turn the personal computer
on and start the Driver. Refer to "Start-up" on page 3-7, or 4-5 for details on starting the
Driver.
When the message [Printer is OFF. Turn Printer ON] appears on the display, change the
[Connect] setting in [Initial] to [PC] in Utility mode. Refer to page 5-47 for details.
Start key