Connecting The Ac Adapter; Turning On The Scanner; Turning Off The Scanner; Disconnecting The Scanner - Minolta DiMAGE Scan Dual III AF-2840 Instruction Manual

Connecting the AC adapter

Connect the output plug of the AC
adapter to the scanner's DC terminal
(1). Plug the adapter unit into a stan-
dard household outlet (2).

Turning on the scanner

Check the scanner is securely connected to the computer. With the front door closed, turn on the
scanner with the power switch. Start up the computer.
When launching the utility software, the front door must be
closed during initialization; the indicator lamp will blink when
the scanner is initializing. Once the indicator lamp glows
steadily, the scanner can be used.

Turning off the scanner

Close the utility software and press the main switch on the
front of the scanner unit. Unplug the scanner when cleaning or
when the product is not in use for extended periods.

Disconnecting the scanner

The easiest and safest way to disconnect the scanner from the computer is to turn off both
devices as well as any peripheral devices and remove the cable. When connecting the scanner
with these devices on, quit the utility software first, then disconnect the cable.
Never disconnect the scanner when the indicator
lamp is blinking.
2
1
19