Status > Router; Status > Local Network - Cisco WRT610N Quick Installation Manual

Simultaneous dual-n band wireless router
Hide thumbs Also See for WRT610N:
Table of Contents

Advertisement

Chapter 3
Administration > Firmware Upgrade
Before upgrading the firmware, download the Router's
firmware upgrade file from the Linksys website,
www.linksys.com. Then extract the file.
Upgrade Firmware
Please select a file to upgrade
the extracted firmware upgrade file. Then click Upgrade
and follow the on-screen instructions.
Status > Router
The Status > Router screen displays the Router's current
status.
Status > Router
Router Information
Firmware Version
This is the Router's current firmware.
Firmware Verification
This is a unique identifer that
verifies that you have valid firmware.
Current Time
This shows the time, as you set on the
Setup tab.
Simultaneous Dual-N Band Wireless Router
Click Browse and select
Advanced Configuration
Internet MAC Address
This is the Router's MAC Address,
as seen by your ISP.
Server Name
This is the specific name that will be used
for the network storage FTP and Media Server. You entered
this name on the Storage > Administration tab.
Host Name
If required by your ISP, this would have been
entered on the Setup tab.
Domain Name
If required by your ISP, this would have
been entered on the Setup tab.
Internet Connection
Connection Type
This section shows the current network information
stored in the Router. The information varies depending on
the Internet connection type selected on the Setup > Basic
Setup screen.
Select Release IP Address or Renew IP Address as
appropriate to release or renew a DHCP lease.
Click Refresh to update the on-screen information.
Status > Local Network
The Status > Local Network screen displays information
about the local network.
Status > Local Network
Local Network
Local MAC Address
The MAC Address of the Router's
local interface is displayed here.
Router IP Address
This shows the Router's IP address, as
it appears on your local network.
Subnet Mask
The Router's Subnet Mask is shown here.
DHCP Server
The status of the Router's DHCP server
function is displayed here.
Start IP Address
For the range of IP addresses used by
devices on your local network, the beginning IP address
is shown here.
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Linksys wrt610n

Table of Contents