Event Log; Screen Saver - Visonic POWERMAX REMOTE - PROGRAMMER SOFTWARE User Manual

Data Details Tables __________________________________________________________ 6-9
6.17 Event/History Log
The Event Log displays the different events that the control panel has detected, together
with their details. PowerMax Remote Programmer stores up to 100 events. This table
includes: event number; relevant zone or user number/code; relevant zone name; type of
event; date and time.
The History Log displays 250 different events that the control panel has detected and stored
in a different folder.

6.18 Screen Saver

This function enables you to display any message on the control panel display screen. The
message may contain up to four rows of text (max. of 16 characters on each row). To
activate the screen saver, set the screen saver field at the panel definition table to an option
other than "off".
The screen saver will be displayed on the control panel between the defined starting day
and ending day and between the defined start time and end time of each day.
∗
Available in PowerMax only: Performing Full Upload will automatically load the Event Log.
∗∗
Available in PowerMax+ only:
• When communicating at the speed of 9600 bps (via serial or GSM digital communication), the PowerMax Remote
Programmer loads all the data.
• When communicating at the speed of 300 bps (via PSTN or GSM analog communication), you need to perform
Upload Table to load the data.
∗∗∗
Available in PowerMax+ only:
∗ ∗∗
∗∗∗