Keyfob Enrollment Screen - Visonic POWERMAX REMOTE - PROGRAMMER SOFTWARE User Manual

6-4___________________________________________________________Data Details Tables

6.4 Keyfob Enrollment Screen

A Keyfob transmitter is a multi-button wireless unit. For each PowerMax control panel,
there are a total of eight transmitters. They enable the carriers to perform certain system
functions quickly without using the keypad, and therefore improve system efficiency.
In order that the control panel and the PowerMax Remote Programmer will recognize the
Keyfob transmitters, each one must be enrolled in the system, and linked to a specific
ordinal number between 1 and 8. Keyfob initiated events are subsequently identified and
registered with reference to these numbers.
This table displays the keyfob ordinal number, the name of the user carrying this
transmitter, an indication whether the keyfob has been enrolled, the keyfob ID, the keyfob
sync. counter and the keyfob sync. backup.
The PowerMax Remote Programmer enables enrolling and deleting keyfobs.
To Enroll a Keyfob Transmitter to the Control Panel
In order to perform this procedure collect together:
•
A PowerMax control panel, which will be used to pass the keyfob identifying
information from the keyfob through to the PC and from there to the
customer's PowerMax control panel.
•
The keyfob transmitter that is to be enrolled and sent to the customer.
1. Enroll the keyfob transmitter to the control panel as detailed in the PowerMax
Installer Guide.
Note: Remember the keyfob number you enrolled the keyfob to.
2. Connect and login via serial connection to the PowerMax as detailed in chapter
7: "Connecting to the PowerMax Control Panel".
3. Upload the keyfob data from the PowerMax.
4. In the Keyfob Enrollment table, enter the keyfob ID, the sync. counter and the
sync. counter backup numbers displayed on the screen next to the keyfob
number you enrolled the keyfob to.
5. Logout and disconnect from the PowerMax.
6. Connect and login to your customer's PowerMax control panel.
7. Click the Options icon in the tool bar or select Options in the View menu.
8. Select the Data tab.
9. Check the Send updated data immediately checkbox.
10. Enter the keyfob ID, the sync. counter and the sync. counter backup numbers to
the relevant keyfob in the Keyfob Enrollment table.