Data ______________________________________________________________________ 8-1
The data tab is used to define specific upload/download settings to facilitate data transfer.
8.1 Defining Data Settings
The Data dialog box enables you to customize specific data settings in the
upload/download process.
From the View menu, select Options, then click on the Data tab; the Data dialog box
appears.
Applies only
to PowerMax+
Note: The contents of the Data dialog box differs for each PowerMax version.
1.
Check the Send updated data immediately field, to automatically update
changed settings from the PowerMax Remote Programmer to the PowerMax
control panel.
Note: If the above field is not checked, the PowerMax control panel will only be
updated when performing download table or full download.
Chapter 8: Data
Figure 8-1: Options – Data Tab