Keypad Enrollment - Visonic POWERMAX REMOTE - PROGRAMMER SOFTWARE User Manual

Data Details Tables __________________________________________________________ 6-5
Every cell you update will be automatically downloaded to the customer's
PowerMax. (Be sure not to change other parameters.)
11. Logout and disconnect.
Now all you have to do is to send the keyfob transmitter to your customer!
To Delete a Keyfob
In the ID column, change the ID to 00000000, and then download to the control
panel as detailed in chapter 7: Connecting to the PowerMax Control Panel.
6.5 1W Keypad Enrollment
A 1W (one-way) Keypad is a multi-button wireless keypad unit. For each PowerMax
control panel, there are a total of eight 1W keypads.
In order that the control panel and the PowerMax Remote Programmer will recognize the
Keypads, each one must be enrolled in the system, and linked to a specific ordinal number
between 1 and 8. Keypad initiated events are subsequently identified and registered with
reference to these numbers.
This table displays the keypad ordinal number, an indication whether the keypad has been
enrolled, the keypad ID, the keypad sync. counter and the keypad sync. backup.
The PowerMax Remote Programmer enables enrolling and deleting keypads.
To Enroll a Keypad to the Control Panel
In order to perform this procedure collect together:
•
A PowerMax control panel, which will be used to pass the keypad identifying
information from the keypad through to the PC and from there to the
customer's PowerMax control panel.
•
The keypad that is to be enrolled and sent to the customer.
1. Enroll the keypad to the control panel as detailed in the PowerMax
Programming Guide.
2. Connect and login via serial connection to the PowerMax as detailed in chapter
7: "Connecting to the PowerMax Control Panel".
3. Upload the keypad data from the PowerMax.
4. In the Keypad Enrollment table, enter the keypad ID, the sync. counter and the
sync. counter backup numbers displayed on the screen next to the keypad
number you enrolled the keypad to.
5. Logout and disconnect from the PowerMax.
6. Connect and login to your customer's PowerMax control panel.