User Settings; User Codes - Visonic POWERMAX REMOTE - PROGRAMMER SOFTWARE User Manual

Data Details Tables __________________________________________________________ 6-3

6.2 User Settings

User Settings enables you to define PowerMax settings, applicable to each individual site.
Set User Tel No.: Type the telephone number where the user can be reached while away
from the site. The control panel will call this number to report the event types defined by
the installer in the Communications Definitions screen. Do not use any parentheses or
dashes when typing the number.
Note: In PowerMax+ it is possible to enter 4 private telephone numbers in this table.
Set Voice Option: You can either enable or disable the voice prompts and messages.
Note: You can only hear voice prompts from the control panel, not from the PowerMax
Remote Programmer.
Autoarm ∗∗ : You can select to arm the control panel automatically (at a predefined time).
Auto Arm Time ∗∗ : You can define the time to automatically arm the system.
Squawk ∗∗ : You can enable or disable the squawk (short siren sound) option upon arming
and disarming.
Time Format ∗∗ : You can adjust the control panel built-in clock to show the time in
European format (hh:mm) or US format (hh:mm AM/PM).
Date Format ∗∗ : You can adjust the control panel built-in calendar date to show the date in
European format (dd/mm/yyyy) or US format (mm-dd-yyyy).

6.3 User Codes

This table defines the PowerMax users and lists their codes. Only users, whose numbers
and codes are listed in this screen, can activate the control panel. PowerMax can store up to
8 user numbers and codes. All User codes must be different from the Duress code and
Installation code.
User Number 1 is known as the Master User. He is the only user who has the authority to
modify the User Settings and User Codes screens. The Master User code cannot be 0000.
To Enter a User Code
1. Identify the user number you wish to define.
2. Enter a four-digit code that is unique to the selected user number.
3. Enter comments and additional information about this user.
∗∗
Available in PowerMax+ only.