Visonic POWERMAX REMOTE - PROGRAMMER SOFTWARE User Manual page 22

4-4______________________________________________________________________ Sites
The New Site window will appear displaying the Work Online tab with the
Phone Number field disabled and the Auto detection checkbox enabled.
Figure 4-4: New Site Window - Work Online via a Serial Port
4. Enter the download code located in the control panel (for further details, see
PowerMax User Guide). The Login button will become enabled.
5. Check the Auto Detection checkbox if you want the program to automatically
scan the computer ports to detect PowerMax presence.
Caution! For local download, the PowerMax must be set to the installer mode,
otherwise the software will not detect it (not applicable to PowerMax+).
6. Click Login.
7. If you marked the Auto Detection checkbox, the program will start scanning the
different ports to look for a PowerMax and will then connect to the PowerMax
and verify the download code.
If you did not mark the auto detection checkbox, the program will try to connect
to the PowerMax via the serial port defined in the Communications settings.
To work via a telephone modem
1. In the New Site window click Options.... The Options Communications dialog
box will appear.