Siren Enrollment; Zone Definitions - Visonic POWERMAX REMOTE - PROGRAMMER SOFTWARE User Manual

6-6___________________________________________________________Data Details Tables
7. Click the Options icon in the tool bar or select Options in the View menu.
8. Select the Data tab.
9. Check the Send updated data immediately checkbox.
10. Enter the keypad ID, the sync. counter and the sync. counter backup
numbers to the relevant keypad in the Keypad Enrollment table.
Every cell you update will be automatically downloaded to the customer's
PowerMax. (Be sure not to change other parameters.)
11. Logout and disconnect.
Now all you have to do is to send the keypad transmitter to your customer!
To Delete a Keypad
In the ID column, change the ID to 00000000, and then download to the control panel as
detailed in chapter 7: Connecting to the PowerMax Control Panel.
6.6 2W Keypad Enrollment
A 2W (two-way) Keypad is a multi-button wireless keypad unit.
The PowerMax Remote Programmer displays all enrolled 2W Keypads.

6.7 Siren Enrollment

A siren is a two-way wireless unit which emits a loud siren and flashes a bright light
in the event of a burglary.
The PowerMax Remote Programmer displays all enrolled sirens.

6.8 Zone Definitions

Zone Definitions allows you to attribute one of the zone types to any one of the wireless
zones offered by the PowerMax. In addition, it allows you to assign a name to each zone
and determine whether the zone will operate as a chime zone while the system is in the
disarmed state.
After uploading data from the PowerMax
devices. The received signal strength indication (RSSI) of the device can also be viewed
after pressing on the UL Table icon and then pressing "OK".
∗
Available in PowerMax10 only
∗
you can view the RF ID numbers of all enrolled