Table of Contents
Advertisement
7-6________________________________________ Connecting to the PowerMax Control Panel
Tip: If you are not sure of the time to enter in the Wait for 2-4 rings during and
Wait for Connection fields, enter a high number (i.e. 100 seconds), initiate
connection as detailed in Connecting by Remote Connection in Chapter 7. Time
on your watch the number of seconds your modem takes for 2 rings and then
click Hang Up. Enter the number of seconds entered in the Wait for 2-4 rings
during field and Wait for Connection fields.
6.
Check the Use only additional initialization commands checkbox to cancel the two
other options. The Ignore carrier detection and the Wait for dial tone before dialing
checkboxes initiate additional initialization commands to be sent by the system.
7.
Make sure that the string of characters in the Additional initialization
commands is correct for the selected modem.
If not, click Select from recommended list; the Recommended Modem
Initialization Strings screen appears.
Figure 7-6: Recommended Modem Initialization Strings
8.
Select the correct initialization string, then click OK; the selected string will
appear in the Additional initialization commands edit box.
9.
Click OK; the Modem Settings dialog box closes and the Communication dialog
box appears.
10.
Click OK.
7.1.3 Callback
In the Phone number field the user enters the PowerMax Remote Programmer return
telephone number (the telephone number that connects to the modem). In the Wait before
sending field, the user enters the amount of time (in seconds) the PowerMax Remote
Programmer waits before identifying the call as failed.
Figure 7-7: Callback Phone Number String
Hide quick links:
Advertisement
Table of Contents
