Table of Contents
Advertisement
7-2________________________________________ Connecting to the PowerMax Control Panel
7.1.1 Local Connection (Serial Port)
Local connection is used when the PowerMax Remote Programmer is within direct cable
connection distance from the PowerMax control panel. When using Local Connection there is
no need for a modem.
1.
From the Communications mode drop-down list, select Serial Port. The serial
port parameters are displayed as follows:
• The Comm port field becomes enabled.
• The Baud rate field displays 9600, this being the baud rate used for serial
connection.
• The Parity and the Stop bits fields do not change.
2.
Change the Comm port field as necessary.
3.
Auto-Detection Option: Check the Auto detect PowerMax when program
starts checkbox, so that when starting the program, the system will
automatically search for the control panel connected to the communication port.
Note: The auto-detection option can also be activated by selecting Port
Auto Detection from the Communications menu or by checking the
relevant checkbox in the New Site dialog box.
4.
Click OK.
Note: When the auto detection procedure is initiated, either when starting
the program or when choosing this option in the Communication menu or
New Site dialog box, the following screen will appear, showing you the
names of the ports being scanned.
Figure 7-2: Communications Mode - Serial Port
Figure 7-3: Progress Bar
Hide quick links:
Advertisement
Table of Contents
