Product Dimensions - Dacor ER36D Installation Instructions Manual

Product Dimensions

Product tolerances: ±1/16" (±1.6 mm)
GAS - ELECTRICAL ACCESS DIMENSIONS
Model A
5 5/8" 18 3/8"
ER36D
(142.9 mm) (466.7 mm)
3 13/16" 18 11/16"
ER48D
(96.8 mm) (474.7 mm)
* The diameter on models equipped for use in Canada is ¼" (6.4mm) larger
than those stated. Canadian units come from the factory pre-wired with
an appliance cord. When installing an appliance cord on models that are
not pre-wired, the hole size must be increased to 1 1/8" (1 3/8" for model
ER48D) by removing the conduit bracket inside the range electrical access
box.
(40 mm)
Width: ER36D - 35 7/8" (911 mm)
ER48D - 47 7/8" (1216 mm)
Planning the Installation
B C D
10 3/4" 13 11/16"
(273.0 mm) (347.7 mm)
9 3/8" 13 3/4"
(238.1 mm) (349.3 mm)
48" (1219 mm)
30 3/4" (781 mm)
29 3/8" (746 mm)
28 1/4" (718 mm)
26 1/8" (664 mm)
(483 mm)
1 1/16" (27 mm) to cooking
surface (top of grates) from
top of trim
Finished side
E*
7/8"
(22.2 mm)
1 1/8"
(28.6 mm)
Inlet
B
A
Front of open door
Front of handle
Front edge of bull nose
Front panel
Rear of front panel/oven door
(229 mm)
(51 mm)
(387 mm)
(940 mm)
panel
(908 mm)
Gas regulator access,
cover removed
Range electrical access,
cover removed
Back of range
D
E Electrical connection
hole in bottom
C
24" (610 mm)
**
(229 mm)
**
(76 mm)
**
** Optional
5