Aligning The Top Of The Finisher - Lexmark 12N0008 - C 910 Color LED Printer User Manual

Aligning the top
Note:
Any time you move the printer or
finisher, recheck printer and finisher top
alignment.
of the finisher
Follow these instructions if the alignment
marks on top of the finisher are not
aligned with the edges of the cover on
the side of the printer.
1
Loosen the guide rail
thumbscrews.
If you made previous adjustments,
the thumbscrews will already be
loose.
2
Rotate the adjustment knobs as
needed to raise or lower the side
of the finisher.
To raise the finisher, rotate the
adjustment knobs clockwise.
To lower the finisher, rotate the
adjustment knobs
counterclockwise.
3
Tighten the guide rail
thumbscrews.
4
Roll the finisher toward the printer
until the finisher locks to the
docking pins.
You hear a click when the finisher
locks into position.
15
Setup