Introduction - Lexmark 12N0008 - C 910 Color LED Printer User Manual

Introduction

Note:
with an optional printer cabinet, or a low
profile printer stand and optional drawers
to install a finisher.
Printer with cabinet, high capacity feeder, and finisher
Printer with low profile printer stand, optional drawers,
high capacity feeder, and finisher
Your printer must be configured Your Lexmark™ C910™ printer supports
an optional finisher that adds hole
punching, stapling, and offset functions
to the printer output capabilities.
Your finisher also increases output
capacity. You can stack up to 100 sheets
of 20 lb paper in bin 1 (the top bin) and
1000 sheets in bin 2 (the lower bin).
Depending on the finisher you have
chosen, you can punch 3 or 4 holes in
your print jobs. The number of holes and
their placement are set at the factory.
Finisher Part number
3-Hole 12N0784
4-Hole 12N0785
You can corner staple up to 30 sheets of
20 lb paper. Stapled jobs exit face down
into bin 2.
If you select offsetting, your print jobs
exit into bin 2. Transparencies, card
stock, glossy paper, and labels exit only
into bin 1.
Introduction
1