Lexmark 12N0008 - C 910 Color LED Printer User Manual page 49

Note:
Do not move the adjustment
knobs more than three complete turns
from their starting position. Adjustments
greater than three turns may cause
paper jams.
4
Loosen the guide rail
thumbscrews.
5
Rotate both adjustment knobs as
shown, the same amount to raise
or lower the side of the finisher.
A half turn of the knob moves the
position of the hole approximately
one third to one half the distance
of the punched hole.
To move the bottom of the paper
down, rotate the knobs clockwise.
To move the bottom of the paper
up, rotate the knobs
counterclockwise one quarter
turn.
Troubleshooting
45