For example, to set up remote "Printer 3" for a Brother printer with the print
server BRN_310107_P1 using the PSERVER NLM called BROTHER1PS, you
would type:
SET NETWARE NPRINTER BROTHER1PS 3 ON BRN_310107_P1
SET NETWARE RESCAN
EXIT
You can also enter the remote printer name using your web browser by
connecting to the Brother print server using the TCP/IP protocol and selecting
the NetWare protocol configuration.
The same services assigned by NetWare print server name cannot be used for
both queue server mode and remote printer mode.
You must now unload the PSERVER NLM from your NetWare file server
console and then reload it in order for the changes to take effect.
Other Sources of Information
1. Visit
http://solutions.brother.com/
printing.
2. Refer to
chapter 12
address of the printer.
CHAPTER 6 NOVELL NETWARE PRINTING
for more information on network
of this user guide to learn how to configure the IP
6-18