Configuring Dlc On Windows Nt/2000 - Brother HL-1870n Network User's Manual

Configuring DLC on Windows NT/2000

To use DLC on Windows NT, you must first install the DLC protocol.
1. Log into Windows NT with administrative privileges. Go to the NT
Control Panel and double click on the Network icon. Windows 2000
users select the properties of the Local Area Connection.
2. On Windows NT 3.5x systems, select Add Software. On Windows NT
4.0 systems, click on the Protocol tab, and click Add. Windows 2000
users click the Install button from the General Tab.
3. Select DLC Protocol and then OK or Add if using Windows 2000. You
may be asked for the location of the files, for Intel based computers, the
necessary files are stored in the i386 directory of the Windows NT CD-
ROM. If you have a non-Intel platform, specify the correct directory on
your Windows NT CD-ROM. Click Continue (for 3.5x systems) or
Close (for 4.0 systems).
4. Reboot your system to make the change take effect. Windows 2000
should not require a re-boot.
CHAPTER 8 DLC PRINTING
8-2