Printer Driver Already Installed; Other Sources Of Information - Brother TD-series User Manual

Printer driver already installed

If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
®
a
For Windows XP and Windows Server
Click the Start button and choose Printers and Faxes.
®
For Windows Vista
Click the , Control Panel, go to Hardware and Sound and open Printers.
®
For Windows 7:
Click the , and open Devices and Printers.
For Windows Server
Click the Start button, Control Panel, Hardware and Sound, and then Printers.
For Windows Server
Click the Start button, and open Devices and Printers.
b
Right click on the printer driver you wish to configure, and then choose Properties (Windows
®
Windows Vista / Windows Server
Printer Properties (Windows
c
Click the Ports tab and click Add Port...
d
Choose the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the New
Port... button.
e
The Add Standard TCP/IP Printer Port Wizard will start.
f
Enter the IP address of your network printer. Click Next.
g
Click Finish.
h
Close the Printer Ports and Properties dialog boxes.

Other sources of information

See Chapter 2 of this manual to learn how to configure the IP address of the printer. For more information,
visit us at http://solutions.brother.com
®
2003:
:
®
2008:
®
2008 R2:
®
2003/ Windows Server
®
7).
Network printing: basic TCP/IP Peer-to-Peer printing
®
2008/ Windows Server
3
3
®
XP/
®
2008 R2)/
3
17