Windows Nt 4.0 Printing (Printer Driver Not Yet Installed) - Brother HL-1870n Network User's Manual

Windows NT 4.0 Printing
(Printer Driver not yet installed)
1. Go to the Start button, choose Settings, and then select Printers. Double
click the Add Printer icon to get the Add Printer Wizard. Click. Select
My Computer (Not Network Printer) and click on Next.
2. Select Add Port, select LPR Port (LPR Port will not be displayed unless
you install the "Microsoft TCP/IP Printing" protocol as described
earlier) from the list of available ports and click on New Port.
3. Type in the IP address that you wish to assign to the print server in the
Name or address of server providing lpd: box. If you have edited your
HOSTS file are using Domain Name System, enter the name associated
with the print server, instead of an IP address. As the print server
supports TCP/IP and NetBIOS names, you can also enter the NetBIOS
name of the print server. The NetBIOS name can be seen in your printer
configuration page. From default the NetBIOS name will usually appear
as "BRN_xxxxxx" where xxxxxx is the last six digits of the Ethernet
address.
4. Type in the print server service name in the Name of printer or print
queue on that server: box. If you do not know which service name to use,
enter BINARY_P1 and then click on OK:
Note
Refer to Appendix B for more information on Service Names.
5. Click on Close. The new print server IP address should be listed and
highlighted as an available port. Click on Next.
6. Select the desired printer model. If the correct model is not displayed,
click on the "Have Disk" option and insert the CD-ROM supplied with
your printer.
7. If the driver already exists, select Keep Existing Driver (if it does not,
this step will be skipped), and then click on Next.
8. If desired, change the name of the printer then click on Next.
9. If desired, make the printer shared (so other users can access it), and
select the operating system(s) that these other computers will be running.
Click on Next.
10. Select Yes when you are asked "Would you like to print a test page?"
Click on Finish to complete the installation. You may now print to the
printer as if it were a local printer.
CHAPTER 2 TCP/IP PRINTING
2-6