Brother HL-1870n Network User's Manual page 61

11. Once your computer has re-started you must create a printer on your
Windows 95/98/Me/NT4.0/2000/XP system using the standard
Windows 95/98/Me/NT4.0/2000/XP printer setup procedure. To do this,
go the Start button, select Settings and then Printers.
12. Select Add Printer to begin the printer installation.
13. Click Next when you get the Add Printer Wizard window.
(For Windows 95/98/Me user)
14. Select Local Printer, when you are asked how the printers are connected
to your computer and push Next.
(For Windows NT4.0/2000/XP user)
14. Select Local Printer, and then delete the check mark in Plug and Play
check box.
<For Windows 95/98/Me users>
15. Select the desired model of the remote printer (for example, Brother HL-
series). If necessary, click Have Disk to load the driver from the CD-
ROM. Click Next when you are done.
16. If you have selected a printer driver that is already being used, you have
the option of either keeping the existing driver (recommended) or
replacing it. Select the desired option and press Next.
17. Select the Brother Internet port (BIP...) which you select in step 6 and
press Next.
<For Windows NT4.0/2000/XP users>
15. Select the Brother Internet port (BIP...) which you select in step 6 and
press Next.
16. Select the desired model of the remote printer (for example, Brother HL-
series). If necessary, click Have Disk to load the driver from the CD-
ROM. Click Next when you are done.
17. If you have selected a printer driver that is already being used, you have
the option of either keeping the existing driver (recommended) or
replacing it. Select the desired option and press Next.
18. Enter any desired name for the BIP remote printer and press Next. Note
that this name does not need to match the Port name that you assigned in
step 6, or E-mail address that you assigned in step 9.
19. Select No when asked if you want to print a test page, unless you have
already configured the remote print server to receive BIP print jobs.
You have now finished installing the BIP software. If you need to configure
another remote print server, go to next section, Adding a Second Brother Internet
Port.
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION
5-8