Creating A Printer Agent; Configuring Netware 3 And Netware 4 Systems - Brother HL-1870n Network User's Manual

Creating a Printer Agent

1. In NetWare Administrator, select object | create | NDPS Printer. Enter
the NDPS printer name.
For further information regarding NDPS printers and printing please refer to the
"Other Sources of Information" section at the end of this chapter.
2. If this is a new printer select create A New Printer Agent.
3. If there is already an NDS printer and you are upgrading it to use the
NDPS scheme, select Existing NDS printer object. You will then have to
select which printer object you wish to upgrade.
4. Enter the name you wish the Printer Agent to be referred to and either
type the name of the NDPS Manager or click the radio button and select
a NDPS Manager. Select the type of Port for the Printer Agent and Click
OK.
5. You must now specify the type of connection that you are going to use.
There are four possible options. Select the LPR over IP option.
6. Enter the relevant details of the printer and Brother recommend typing
Binary_P1 for the printer name. Click finish and wait. Select the printer
drivers for the client operating systems.
You are now ready to print.
Configuring Netware 3 and NetWare 4
systems
Brother's BRAdmin application provides similar functionality to the NetWare
PCONSOLE utility (or the NWADMIN utility in NetWare 4.1x or later). To use
the BRAdmin application to configure a Brother print server under NetWare,
make sure that you are logged in as SUPERVISOR (NetWare 2.xx or 3.xx) or
ADMIN (NetWare 4.1x or later) and perform the appropriate steps as detailed in
the following pages.
You must install the Novell NetWare Client 32 if you wish to create queue
information on your NetWare servers by BRAdmin.
CHAPTER 6 NOVELL NETWARE PRINTING
6-5