Windows Nt 3.5X Setup - Brother HL-1870n Network User's Manual

Windows NT 3.5x Setup

1. From the Windows NT Main group, double click on the Print Manager
icon.
2. Select Printer from the menu bar and click on Create Printer.
3. Enter any desired name for the printer in the Printer Name box.
4. Select the printer model in the Driver menu.
5. Choose Other (or Network Printer for V3.1 systems) from the Print to
menu.
6. Click on Hewlett-Packard Network Port.
7. Type in your desired name for the port (this name must not be an
existing port or DOS device, such as LPT1).
8. The MAC addresses (Ethernet addresses) of available print servers will
appear in the Card Address menu. Select the desired address (You can
see the Ethernet address on the printer configuration page)
You can find the node name and MAC address by printing out the printer
configuration page. Refer to the User's Guide for information on how to print the
configuration page on your print server.
9. Click OK.
10. If you want to share the printer, click Share the Printer on the Network.
11. Click OK.
12. If necessary, select the appropriate printer options and then click OK.
CHAPTER 8 DLC PRINTING
8-5