Configuring The Brother Print Server (Queue Server Mode In Nds Mode Using Novell Nwadmin And Bradmin - Brother HL-1870n Network User's Manual

Configuring the Brother Print Server
(Queue Server Mode in NDS mode)
using Novell NWADMIN and BRAdmin
If you do not wish to use the Brother BRAdmin application solely to configure
your NetWare file server, use the following instructions for configuration using
the NWADMIN application in conjunction with the BRAdmin application.
1. Make sure that you are logged in as ADMIN in NDS mode on the
NetWare 4.1x (or later) file server and start the NWADMIN application.
2. Select desired Context that will contain the Printer and then click on
Object from the menu bar and then Create. When you get the New
Object menu, select Printer and then OK.
3. Enter the name of the printer and select Create.
4. Select the desired Context that will contain the default print queue, and
then click on Object and Create to get New Object menu.
5. Select Print Queue and then OK. Make sure that Directory Service
Queue is selected and then type in a name for the default print queue.
6. Click on the button to select the print queue volume. Change the
directory context if necessary, then select the desired volume (from
Available Objects) and click OK. Click Create to create the print queue.
7. Change context if required and then double click the name of the printer
you created in step 3.
8. Click Assignments and then Add.
Change the context if necessary and select the print queue you created in step 5.
9. Click Configuration and set the Printer type to Other/Unknown. Click
OK and then OK again.
10. Change the context if required, select Object from the menu bar and then
Create. When you get the New Object menu, select print server and then
OK.
11. Enter the name of the print server and select Create.
CHAPTER 6 NOVELL NETWARE PRINTING
6-8