How To Select The Print Server (Appletalk/Ethertalk) - Brother HL-1870n Network User's Manual

How to Select the Print Server
(AppleTalk/EtherTalk)
1. Open the Chooser from the Apple Menu on the Macintosh, and then
click on the LaserWriter icon (if necessary, select the appropriate
AppleTalk zone from the Network Control Panel).
Figure 2 Macintosh Chooser
2. Click on the appropriate print server and close the Chooser program.
You should now be able to print from the Macintosh.
If you cannot see the print server, first make sure that your cabling is correct and
that you have enabled EtherTalk from your Macintosh Network Control Panel.
You may also need to force the print server into the correct AppleTalk zone
using the BRAdmin application or a web browser.
CHAPTER 7 APPLETALK (ETHERTALK) TCP/IP PRINTING
7-3