Printer Driver Already Installed; Other Sources Of Information - Brother HL-4040CN Network User's Manual

Printer driver already installed

If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
a
For Windows Vista™:
Click the Start button, Control Panel, Hardware and Sound, and then Printers.
®
For Windows XP and Windows Server
Click the Start button and select Printers and Faxes windows.
®
For Windows 2000:
Click the Start button and select Settings and then Printers.
b
Right click on the printer driver you wish to configure, and then select Properties.
c
Click the Ports tab and click Add Port.
d
Select the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the
New Port... button.
e
The Standard TCP/IP Port Wizard will start.
f
Enter the IP address of your network printer. Click Next.
g
Click Finish.
h
Close Printer Ports and Properties dialog box.

Other sources of information

See Chapter 2 of this User's Guide to learn how to configure the IP address of the printer.
Network printing from Windows
®
2003:
®
: basic TCP/IP Peer-to-Peer printing
3
3
3
17