Table of Contents
Advertisement
Installing the modem with Windows® 95, Windows 98,
Plug and Play (PNP) Installation
Simply plug your new modem into your
computer, power up, and be ready to
work. The operating system recognizes
and configures the modem for you. The
modem must be installed before any
software is loaded.
Your 3Com U.S. Robotics® modem is a
Plug and Play device. However, Plug
and Play will not work if you do not
have resources available or if devices on
your system are not reporting resource
8
and Windows NT 4.0
usage correctly. Your modem requires
one COM port and one IRQ setting.
How to Insert the Modem into
the Computer
Before you unplug anything, label the
cords or make a sketch of how things are
connected. This can be helpful when you
want to plug things back in later.
Advertisement
Table of Contents
