Lexmark X940 And X945 - Lexmark Dot Matrix Manual

Lexmark X940 and X945

Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not
recommend using vinyl or polyester labels.
Lexmark X940 and X945 support stocks up to 220 g/m
recommend printing on grain long card stock.
The following table lists the maximum weights supported by the trays and the multipurpose feeder.
Note: Scanning large quantities of labels is not recommended.
Overview of card stock and label support
Labels
Card stock
Media specifications
Labels Width:
Length:
Weight:
Thickness:
Smoothness:
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in print quality
degradation.
Card stock Width:
Length:
Weight:
2
Tray 1 Tray 2 and 3
2
105 g/m
2
105 g/m
210–216 mm (8.3–8.5 in.)
279–356 mm (11–11.7 in.)
120–128 g/m
0.13–0.20 mm (0.005–0.008 in.)
100–400 Sheffield*
210–216 mm (8.3–8.5 in.)
279–356 mm (11–11.7 in.)
Up to 220 g/m
Printer specifications
. Always feed labels and card stock from Tray 1, 2, or 3. We
2
220 g/m
2
220 g/m
2
2
126
Multipurpose feeder
2
220 g/m
2
220 g/m