Lexmark X422 - Lexmark Dot Matrix Manual

• Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or
other paper handling problems.
•
Check with the manufacturer or vendor to ensure the card stock can withstand temperatures up to 210°C (410°F)
without releasing hazardous emissions.
•
Do not use preprinted card stock manufacturer with chemicals that may contaminate the printer.
•
Use grain short card stock when possible.
For more information, see "Maintenance procedures" on page 13.

Lexmark X422

The Lexmark X422 prints on many labels designed for use with laser printers.
Card stock is supported from the multipurpose feeder, and labels are supported from the standard tray.
The following table lists the maximum weights supported.
Note: Scanning large quantities of labels is not recommended.
Overview of card stock and label support
Paper source
Tray 1 (standard)
Multipurpose feeder
Card stock and label guidelines
Use only materials recommended for use with laser printers.
To prevent specialty media sheets from sticking together, remove each sheet from the output bin as it is printed.
When printing on labels:
•
Set the Paper Type to Labels from the printer driver.
•
Use standard-size products (either A4 or Letter).
•
Do not use label sheets with a slick backing material.
•
Do not print within 1 mm (0.040 in.) of the die-cut.
Card stock
—
60–199 g/m
Printer specifications
97
Paper labels
60–90 g/m
2
2
—