•
Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive
material may contaminate your printer. It could also void your printer and cartridge warranties.
When feeding labels, the number of labels per sheet can affect registration more than basis weight. Typically, the more
labels per sheet, the better the registration.
When printing on card stock:
•
Set the Paper Type to Card Stock in the Paper Menu.
•
Do not use card stock that is creased. It may cause paper jams.
For more information, see the following:
•
"Pick roller technology" on page 11
•
"Grain orientation" on page 16
•
"Maintenance procedures" on page 13
•
"Troubleshooting" on page 13
Lexmark C752
The Lexmark C752 prints on many labels designed for use with laser printers.
The Lexmark C752 trays, which hold approximately 500 sheets of 75 g/m
The following table lists the maximum weights supported by the trays and the multipurpose feeder.
Note: The optional 2000-sheet drawer supports paper only
Printer specifications
44
2
paper, reliably feed all supported media.