Table of Contents
Advertisement
Lexmark X940 and X945: Overview of card stock and label support
Labels
Card stock
Media specifications
Labels
Width:
Length:
Weight:
Thickness:
Smoothness:
* 150—250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock
Width:
Length:
Weight:
When printing on labels:
•
Set the Paper Type to Labels in the Paper Menu.
•
Do not use label sheets with a slick backing material.
•
Do not print within 1 mm (0.04 in.) of the die cut, the edge of the label or the perforations, or between the die cuts.
•
Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam.
•
Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive
at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your
warranty.
When printing on card stock:
•
Use grain long card stock, and set the Paper Type to Card Stock.
•
Do not use card stock that is creased. It may cause paper jams.
Lexmark X940, X945
Lexmark X940, X945
Limit label printing to occasional use of A4 or letter size paper office labels
designed for laser printers. We do not recommend using vinyl or polyester
labels.
The Lexmark X940 and X945 support stocks up to 216 g/m
labels and card stock from trays 1, 2, or 3. When printing on card stock, we
recommend using grain long card stock.
The following table lists the maximum basis weights supported by the trays
and the multipurpose feeder.
Note: Scanning large quantities of labels is not recommended.
Trays 1
2
105 g/m
2
105 g/m
210 to 216 mm (8.3 to 8.5 in.)
279 to 356 mm (11 to 11.7 in.)
120 to 128 g/m
0.13 to 0.20 mm (0.005 to 0.008 in.)
100 to 400 Sheffield*
210 to 216 mm (8.3 to 8.5 in.)
279 to 356 mm (11 to 11.7 in.)
Up to 216 g/m
Trays 2, 3
2
216 g/m
2
216 g/m
2
2
24
2
. Always feed
Multipurpose feeder
2
216 g/m
2
216 g/m
Advertisement
Table of Contents
