Lexmark E220 - Lexmark Dot Matrix Manual

Lexmark E220

Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using
vinyl or polyester labels.
The Lexmark E220 supports stocks up to 163 g/m
stock or labels.
The following table lists the maximum weights supported by Tray 1 and the manual sheet feeder.
Overview of card stock and label support
Paper source
Tray 1
Manual feed
For paper and transparency specifications, see the Lexmark E220 Publications CD.
Media specifications
Labels Width:
Length:
Weight:
Thickness:
Smoothness:
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Note: To minimize curl, use the top exit when printing on card stock and labels.
For more information, see "Maintenance procedures" on page 13.
2
(43 lb). The automatic paper feeder can hold up to 10 sheets of card
Card stock
Index Bristol
2
163 g/m
2
163 g/m
210–216 mm (8.3–8.5 in.)
279–297 mm (11–11.7 in.)
Up to 163 g/m
Up to 0.25 mm (0.01 in.)
100–400* Sheffield
Up to 163 g/m
Up to 163 g/m
Printer specifications
61
Tag Cover
2
—
163 g/m
2 —
163 g/m
2
(43 lb)
2
Index Bristol (90 lb)
2
Tag (100 lb)
Labels
Paper Vinyl
2
—
163 g/m
2 —
163 g/m