Lexmark Dot Matrix Manual page 39

Overview of card stock and label support
Paper source
Tray 1 (standard tray)
For paper and transparency specifications, see the printer User's Guide.
Media specifications
Labels Width:
Length:
Weight:
Thickness:
Smoothness:
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Card stock and label guidelines
When printing on labels:
• Feed labels from Tray 1 only.
• Use only paper labels. Do not use vinyl labels.
•
Use only label sheets that have no gaps between the labels.
• Recommended labels are Avery 5260.
•
From the operator panel or from MarkVision Professional, set the Paper Type to Labels.
•
Do not print a large number of labels continuously.
•
Do not use labels that have coating or sizing applied to make the labels liquid-resistant.
• Do not use labels that have exposed adhesive on the label sheets.
When printing on card stock:
• Feed card stock from Tray 1 only.
•
We recommend using Springhill Index Plus 90 lb card stock.
Index Bristol
2
163 g/m
105–216 mm (4.1–8.5 in.)
220–297 mm (8.7–11.7 in.)
120–163 g/m
0.13–0.20 mm (0.005–0.008 in.)
100–400 Sheffield*
Up to 163 g/m
Up to 163 g/m
Acceptable labels
Printer specifications
Card stock
Tag Cover
2 —
163 g/m
2
(32–43 lb)
2
Index Bristol (90 lb)
2
Tag (100 lb)
Unacceptable labels
39
Labels
Paper Vinyl
2 —
163 g/m