Lexmark C935 - Lexmark Dot Matrix Manual

• Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam.
• Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive
at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your
warranty.
When printing on card stock:
•
From the printer control panel, set Paper Type to Card Stock.
•
Do not use creased card stock. It may cause paper jams.
•
We recommend the use of grain long card stock.

Lexmark C935

Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not
recommend using vinyl or polyester labels.
Lexmark C935 supports card stock up to 220 g/m
The following table lists the maximum weights supported by the trays and the multipurpose feeder.
Overview of card stock and label support
Labels
Card stock
Media specifications
Labels Width:
Length:
Weight:
Thickness:
Smoothness:
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in print quality
degradation.
2
.
Tray 1
Not applicable
2
105 g/m
210–216 mm (8.3–8.5 in.)
279–356 mm (11–11.7 in.)
120–128 g/m
0.13–0.20 mm (0.005–0.008 in.)
100–400 Sheffield*
Printer specifications
Trays 2 and 3
Not applicable
2
220 g/m
2
58
Multipurpose feeder
2
220 g/m
2
220 g/m