Lexmark Dot Matrix Manual page 128

As the following table indicates, the paper tray capacities vary depending on the print material construction. See your
printer documentation for additional specifications.
Estimated tray capacities for labels
Label material
Paper, dual web
Vinyl, polyester
The following table lists the print material specifications for the special card stock and label trays, as well as guidelines
for the tray position (upper or lower drawer). This information is intended to convey general guidelines for tray and
drawer selection. We recommend that you test your selected print material to determine the best tray and drawer
selection for your application. The material type, rigidity, sizing, perforations, die-cuts, and surface influence printing
reliability. Contact your point of purchase for more information on the optional trays available for your printer.
Note: If you use materials with a weight over 135 g/m
Card stock and labels supported (11-inch card stock and label trays)
Media
200-sheet heavy duty tray
500-sheet tray (450 grams)
500-sheet tray (550 grams)
500-sheet tray (650 grams)
500-sheet tray (750 grams)
Valid tray positions (upper
and lower)
1
You can manually feed card stock with a weight up to 285 g/m
2
For pressure-sensitive materials under 131 g/m
2
131 g/m , grain short is recommended.
200-sheet heavy duty tray
125 sheets
70 sheets
2
(36 lb bond), print registration and skew may be unpredictable.
1
Paper/card stock
2
75–163 g/m
(20–43 lb bond)
2
60–90 g/m
(16–24 lb bond)
2
75–135 g/m
(20–36 lb bond)
2
120–163 g/m
(32–43 lb bond)
2
163–203 g/m
(43–54 lb bond)
2
Upper: 60–163 g/m
Lower: All supported media
2
, grain long is recommended. For pressure-sensitive materials over
Printer specifications
500-sheet card stock & label tray
Pressure-sensitive paper
2
labels
2
120–150 g/m
(32–40 lb bond)
NA
2
140–165 g/m
(37–44 lb bond)
2
150–175 g/m
(40–47 lb bond)
2
165–180 g/m
(44–48 lb bond)
Upper: 120–150 g/m
Lower: 140–180 g/m
2
.
128
250 sheets
200 sheets
Pressure-sensitive vinyl
2
labels
260–265 g/m
82 lb Liner
NA
NA
260–300 g/m
82–92 lb Liner
265–300 g/m
92 lb Liner
2
Upper: 260–265 g/m
2
Lower: 260–300 g/m
2
2
2
2
2