Lexmark X264Dn, X363Dn, X364Dn, And X364Dw - Lexmark Dot Matrix Manual

• Portrait orientation is preferred, especially when printing bar codes.
• Do not use labels that have exposed adhesive.
• Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged.
•
Do not load a sheet of labels through the machine more than once.
•
Load labels into the manual bypass feeder with the recommended print side faceup and the top edge going in first.
When printing on card stock:
•
Set the Paper Type to Card Stock from the printer driver.
•
Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting
introduces semi-liquid and volatile components into the printer.
• Do not use card stock that is creased. It may cause paper jams.
•
We recommend the use of grain short card stock.
•
Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in
first.

Lexmark X264dn, X363dn, X364dn, and X364dw

Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using
vinyl, pharmacy, or polyester labels. It is recommended to print no more than 20 pages of paper labels a month.
The printer and duplex path support paper and label stock from 60–90 g/m
feeders support card stock up to 163 g/m
must be sent through the manual feeder one sheet at a time.
The following table lists the maximum weights supported by the standard tray, optional 250- and 550-sheet trays, and
multipurpose and manual feeders.
2
(43 lb). You can load up to 50 label sheets in the standard tray. Card stock
Printer specifications
95
2
(16-24 lb). The multipurpose and manual