How To Use Needle Threader; Comment Utiliser Un Enfile-Aiguille - Toyota QUILT 50 Manual

Hide thumbs Also See for QUILT 50:
Table of Contents

Advertisement

A
D

How to use needle threader

(When the machine is equiped with a needle
threader.)
The needle threader can be used to thread the
needle more easily.
1. Thread the machine to the needle guide
refered on page 14. (fig A)
2. Lower presser foot lever. (fig B)
3. Bring the needle to its highest position by
rotating the handwheel towards you.
4. Lower Needle threader lever
guide
from the left side to the right. (fig C)
5. Lower needle thread lever to its lowest position
so the hook passes through the needle eye.
Bring thread from guide
under the hook
. (fig D)
6. Take the thread under hook guide
it up to the right, pressing the thread against the
needle. (fig E)
7. Slightly release the needle threader lever
thread the needle eye. (fig F-1)
The thread is pulled by the hook and passes
through the eye.
8. When the thread passed the needle eye,
release the thread, and fully release the needle
thread lever.
(fig F-2)
NOTE
Repeat the above steps when the thread
does not pass through the needle eye.
Needle threader does not work correctly
when needle is set uncorrectly.
9. Pull out a loop of thread through needle eye.
(fig G)
15
B
English
. Hook Thread to
to the right side
, and bring
Max 15W
E

Comment utiliser un enfile-aiguille

(Lorsque la machine est équipée d'un enfile-
aiguille.)
L'enfile-aiguille peut être utilisé pour enfiler
l'aiguille plus facilement.
as
1. Enfiler la machine par l'enfile-aiguille
indiqué à la page 14. (fig. A)
2. Abaisser le levier presseur de pied-de-biche.
(fig. B)
3. Placer l'aiguille à sa position la plus haute en
tournant le volant vers vous.
4. Abaisser le levier du fil d'aiguille
crochet par le guide
droite. (fig. C)
5. Abaisser le levier du fil d'aiguille jusqu'à sa
position la plus basse pour que le crochet
passe à travers le chas de l'aiguille.
Enlever le fil du guide
passer-le en dessous du crochet
and
6. Prenez le fil en dessous du guide du crochet
et ramener-le vers le haut à droite en pressant
le fil contre l'aiguille. (fig. E)
7. Lâcher légèrement le levier du fil d'aiguille
le fil en même temps. (fig. F-1)
Le fil est tiré par le crochet et passe à travers le
chas de l'aiguille.
8. Lorsque le fil est passé par le chas de l'aiguille,
lâcher le fil et le levier du fil d'aiguille.
(fig. F-2)
Répétez les étapes ci-dessus si le fil ne
passe pas correctement à travers le chas de
l'aiguille. L'enfile-aiguille ne fonctionne pas
lorsque l'aiguille est mal positionnée.
9. Tirez sur la boucle du fil se trouvant dans le
chas de l'aiguille. (fig. G)
C
Français
de la gauche vers la
du côté droit et
comme
. Faire un
. (fig. D)
,
et

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents