Lexicon, Inc.
RV-8 Serial Communications Protocol
7.3.8.2 Data Description
7.3.9 Get Communication Configuration
This command is a request to the RV8 for the current communications configuration for the serial port and
protocol. The RV8 responds to this command with a Communication Configuration Packet.
7.3.9.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
7.3.9.2 Communication Configuration Response Packet
Application Header:
Command
Data Count
Application Data:
Data[0]
7.3.9.3 Data Description
Data Word
Bit
0
0
0
1
Acknowledge Enable:
TRUE Indicates the RV8 will transmit Acknowledge Notification's to the Host.
FALSE Indicates the RV8 will not transmit any positive Acknowledge Notification
Parameter Change Enable:
TRUE Indicates the RV8 will transmit any parameter change Notification as specified
FALSE Indicates the RV8 will not transmit parameter change Notifications.
7.3.10 Set Communication Configuration
The Set Communication Configuration Command allows the serial port user to set up the various serial
port/ protocol configuration parameters.
7.3.10.1 Command Packet Description
© 2004 Lexicon, Inc. All rights reserved.
Application Header:
Command
HOST_SLEEP
Data Count
0
Application Data:
N/A
N/A
DC_CMD_GET_COM_CONFIG
0
N/A
DC_RESP_COM_CONFIG
1
Configuration Register 0
Definition
Acknowledge Enable
Parameter Change Enable
messages. The RV8 will always transmit NAK error notification messages.
in the Parameter Change Notification Message.
Printed on: 01/18/05
0x12
0x00
0x2F
0x00
0x8C
0x01
nn
16 of 74