Chapter 10: Managing Storage Space; Viewing Disk Settings - HP Mv2120 - Media Vault Network Drive User Manual

10
Managing Storage Space
What's in this chapter
»

Viewing Disk Settings

» Adding an Internal Hard Drive
» Removing an Internal Hard Drive
» Creating Mirrored Disks
» Adding and Removing an External USB Device
» Formatting an External USB Device
» Replacing the system drive
You can expand storage in the HP Media Vault in a couple of ways:
Add a
•
expansion bay (Integrated Drive Electronics (IDE) drives are not
supported.). Use this option to add permanent storage space to your
Media Vault.
Add up to two USB disk drives to the Media Vault's USB ports. Use this
•
option to back up to an external storage device or to add temporary
storage space to your Media Vault.
Viewing Disk Settings
Displays information for internal and USB disks.
To open the disk settings tab
At the computer, click Start, All Programs, HP Media Vault, and
1
then Control Center.
On the Tools tab, click Customize HP Media Vault.
2
You are prompted for an administrator name and password if you set one
up. For additional information, see
Click the Disks tab.
3
Serial ATA (SATA) hard drive to the Media Vault's internal
Editing System Settings on page 2-26.
10-