Storage And Shipment; Environment; Packaging - HP 85027A Operating And Service Manual

Directional bridge

Hide thumbs Also See for 85027A:

Table of Contents

STORAGE AND SHIPMENT

The HP 85027 may be shipped or stored in temperatures from -40°Cto +75°Cand at

altitudes up to 15 240 metres (50 000 feet). It should be protected from environmental

conditions which may cause internal moisture condensation.

Ideally each bridge should be repackaged in the original factory package if reshipping is

required. Containers and materials identical to those used by the factory are available

through Hewlett-Packard offices. Alternatively, comparable packaging materials may

be used. in any case, please observe the following guidelines:

Wrap the bridge in heavy paper or anti-static plastic. If shipping to a HP Office

or Service Center complete and attach a service tag (HP P/N 9320-3896, see

Section 6 of this manual or another system component manual).

Use sufficient shock absorbing material on all sides of the HP 85027 to provide a

thick, firm cushion and prevent internal movement.

Seal the shipping container securely and mark it FRAGILE.

In any correspondence, refer to the component by full model and serial number.

HP 85027A/B/C Installation

2-3

~TL

FP~T~

.'~

Table of Contents

85027b 85027c