HP Mv2120 - Media Vault Network Drive User Manual page 123

After an internal mirrored disk is added, it must create the redundant
files. The building status indicates that this is taking place. The percent
complete and estimated time are provided.
Degraded
The degraded status only applies to mirrored drives. It indicates that
one drive failed. The system is operational, but the files stored on the
HP Media Vault are no longer redundant. The light bar for the failed
drive on the HP Media Vault box is red. For additional information on
replacing the failed drive, see
page 10- 1 22 and
Failed
The failed status only applies to non-mirrored drives. It indicates that
one drive failed. The system is not operational until the drive is
replaced. The light bar for the failed drive on the HP Media Vault is
red. For additional information on replacing the failed drive, see
Removing an Internal Hard Drive on page 10- 1 22
Internal Hard Drive on page 10- 1
Size
•
The total storage space on the disk.
Free
•
The amount of space available on the disk.
To view USB disk information
Disk Name
•
The name of the USB disk. You can change the name when you format
the disk.
Actions
•
Format
Deletes all data from the USB disk and prepares it for use in the Media
Vault.
Remove
Click Remove prior to physically removing a USB disk.
Format
•
Linux (ext3)
Removing an Internal Hard Drive on
Adding an Internal Hard Drive on page 10- 1
16.
16.
and Adding an
10-