HP Mv2120 - Media Vault Network Drive User Manual page 38

Click Firmware Options.
4
The Simple Settings page displays.
If you want your Media Vault to automatically check for and install
5
firmware updates, check Automatically check for new firmware.
Check Raise alert when new firmware is available to display a
6
message box on your network computer when new firmware is
downloaded and ready to install.
Select the frequency for checking for updates from the Check for new
7
firmware every drop down list.
Click Save.
8
To install firmware updates immediately
There are two ways that the HP Media Vault notifies you of firmware updates.
One is on the HP Media Vault tab of the Administration Console. If
there is a Yes next to New Firmware Available, click Install. The
Firmware Options Simple Settings page opens. Click Install Firmware to
start the installation. The Media Vault automatically reboots when the install is
complete.
The other way the Media Vault notifies you of a firmware updates is by an
alert on your network computer. Click OK to close the alert. Open the
Administration Console and follow the above steps to install the update
immediately.
To save firmware updates to a computer and install
If your HP Media Vault does not have an Internet connection or if you want to
control when firmware updates are installed, clear the Automatically
check for new firmware check box. It is recommended that you
periodically check for firmware updates on the HP support web site.
From a network computer, go to www.hp.com/support and download the
1
firmware update.
Specify a location on the network computer for saving the file.
2
Once the file is downloaded, go to the HP Media Vault
3
Administration Console as described in To change firmware
update options above.
Click the System tab and then click Edit.
4
2-30 Version