Patching Swvr In A Non-Clustered Architecture - Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Installation Manual

[Enter your Document Title]
Patching SWVR
in a non-
clustered
architecture
This section only applies to a stand-alone architecture. If the e7000 is clustered skip to
the next section entitled "Installing Cluster Services".
It is assumed that Quick Restore v2.01 for the e7000 has been used.
The only patch required is the Compaq SANworks Virtual Replicator Update. (SoftPaq
2829)
http://h18006.www1.hp.com/support/files/server/us/download/16247.html
Installation Instructions for stand-alone systems:
1. Place the Smart Component in a temporary directory on the NAS system, then double-
click it to run.
2. Click 'Install' at the Compaq Package Setup screen.
3. Click 'Install' at the Compaq Setup screen.
4. All the necessary files will be extracted to C:\CP002829.
5. Browse to "C:\Winnt\System32\Drivers."
6. Rename the file CPQVRBus.sys to CPQVRBus.sys.bak.
7. Copy the file "C:\CP002829\CPQVRBus.sys" to the directory
"C:\Winnt\System32\Drivers."
8. Browse to "C:\Program Files\Compaq\SANWorks Virtual Replicator 2.5\WDM"
9. Rename the file CPQVRBus.sys to CPQVRBus.sys.bak.
10.Copy the file "C:\CP002829\CPQVRBus.sys" to the directory C:\Program
Files\Compaq\SANWorks Virtual Replicator 2.5\WDM"
11. Browse to "C:\Winnt\System32."
12. Rename the file Sdapi.dll to Sdapi.dll.bak.
13. Copy the file "C:\CP002829\Sdapi.dll to the directory "C:\Winnt\System32."
14. Browse to "C:\Program Files\Compaq\SANWorks Virtual Replicator 2.5."
15. Rename the file Sdapi.dll to Sdapi.dll.bak.
16. Rename the file VRRegMon.exe to VRRegMon.exe.bak.
17. Copy the file "C:\CP002829\Sdapi.dll to the directory "C:\Program
Files\Compaq\SANWorks Virtual Replicator 2.5."
18. Copy the file "C:\CP002829\VRRegMon.exe to the directory "C:\Program
Files\Compaq\SANWorks Virtual Replicator 2.5."
19. Restart the system.
[Document Restriction Notice]
8